User Manual

101
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Recording Movies at Specic Shutter
Speeds and Aperture Values
Still Images Movies
Set your preferred shutter speed, aperture value, and ISO speed.
For details on available shutter speeds, aperture values, and ISO speeds,
see “Shutter Speeds” (
=
214), “Aperture” (
=
214), and “Changing the
ISO Speed” (
=
80).
1
Enter [ ] mode.
z Set the mode dial to [ ].
z Press the [
] button, choose [ ] in the
menu, and then choose [ ] (
=
30).
2
Congure the settings.
z Press the [ ] button to choose whether
to congure shutter speed or ISO speed,
and then turn the [ ] dial to set the
value.
z Turn the [
] dial to set the aperture
value.
3
Shoot.
z Press the movie button.
z During recording, you can switch the
setting to congure by pressing the [
]
button repeatedly and adjust the value by
turning the [ ] ring.
● Some shutter speeds may cause ickering on the screen when
recording under uorescent or LED lighting, which may be
recorded.
Adjusting the Flash Output
Still Images Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Specify the ash mode.
z Press the [ ] button, choose [Flash
Control] on the [ 5] tab, and then press
the [ ] button (
=
31).
z Press the [
][ ] buttons to choose
[Flash Mode], and then press the [ ]
button.
z Press the [
][ ] buttons to choose
[Manual], and then press the [
] button.
2
Congure the setting.
z Raise the ash, press the [ ] button and
immediately turn the [ ] dial to choose
the ash level, and then press the [ ]
button.
z Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (
=
31)
and choosing [
5] tab ► [Flash Control] ► [Flash Output].
● You can also access the [Flash Control] screen (
=
31) as follows.
- Press and hold the [ ] button for at least one second.
- When the ash is up, press the [
] button and immediately
press the [
] button.
● You can also access the [Flash Control] MENU screen (
=
31)
by raising the ash, pressing the [
] button, and touching [ ].