User Manual

147
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Registering Other Web Services
You can also add Web services besides CANON iMAGE GATEWAY to the
camera. Note that CANON iMAGE GATEWAY must be registered on the
camera rst (
=
146).
1
Access the Web service settings
screen.
z Follow step 1 in “Registering CANON
iMAGE GATEWAY” (
=
146) to log in
to CANON iMAGE GATEWAY, and then
access the Web service settings screen.
2
Congure the Web service you want
to use.
z Follow the instructions displayed on the
smartphone or computer to set up the
Web service.
3
Choose [ ].
z In Playback mode, press the [ ] button
to access the Wi-Fi menu.
z Press the [
][ ][ ][ ] buttons or turn
the [ ] dial to choose [ ], and then
press the [ ] button.
z The Web service settings are now
updated.
● If any congured settings change, follow these steps again to
update the camera settings.
8
Check the conrmation number and
complete the setup process.
z Check the conrmation number on the
second screen in step 6 (displayed after
you pressed the [ ][ ] buttons or turned
the [ ] dial to choose [OK], and then
pressed the [ ] button).
z Make sure the conrmation number on
the camera matches the number on the
smartphone or computer.
z Press the [
][ ] buttons or turn the [ ]
dial to choose [OK], and then press the
[ ] button.
z Complete the setup process on the
smartphone or computer.
z [
] (
=
153) and CANON iMAGE
GATEWAY are now added as
destinations, and the [ ] icon changes
to [ ].
z A message is displayed on the
smartphone or computer to indicate that
this process is nished. You can add
other Web services, as needed. In this
case, follow the instructions from step
2 in “Registering Other Web Services”
(
=
147).
● Connections require that a memory card with saved images be in
the camera.
● You can also change the camera nickname on the screen in
step 3 (
=
146).
● Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed rst when you access the menu. Press
the [
][ ] buttons to access the device selection screen and then
congure the setting.