User Manual

172
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, C1, and C2 Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
● Vignetting may occur if you use the built-in ash when the lens
hood is attached.
Using a Remote Switch (Sold Separately)
Still Images Movies
An optional Remote Switch RS-60E3 can be used to avoid camera shake
that may otherwise occur when pressing the shutter button directly. This
optional accessory is convenient when shooting at slow shutter speeds.
1
Connect the remote switch.
z Make sure the camera is off.
z Open the terminal cover and insert the
remote switch plug.
2
Shoot.
z To shoot, press the release button on the
remote switch.
Using a Lens Hood (Sold Separately)
Still Images Movies
For wide-angle shots of backlit subjects without using the ash, attach
optional Lens Hood LH-DC100/Filter Adapter FA-DC67B to prevent light
outside the angle of view from entering the lens. To attach a hood, you will
need Filter Adapter FA-DC67B, which is included with the lens hood.
z Make sure the camera is off.
z Attach the lter adapter as described
in step 1 of “Using Lens Filters (Sold
Separately)” (
=
171).
z Align the lens hood mark (2) with the lter
adapter mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
z To remove the hood, hold down the hood
release button (3) and turn the hood in
the opposite direction.
z To attach the lens hood inverted (as
shown) when the hood is not used, align
the lens hood mark (2) with the lter
adapter mark (1), and turn the lens hood
in the direction of the arrow until it locks
in place.
(
1
)
(
2
)
(
3
)
(
1
)
(
2
)