Owner's Manual
Table Of Contents
- Camera User Guide
- Table of Contents
- Memory Card Compatibility
- Supplied Accessories
- Parts & Controls
- Basic Guide
- Advanced Guide
- Camera Basics
- Auto Mode / Hybrid Auto Mode
- Other Shooting Modes
- P Mode
- Tv, Av, and M Mode
- Playback Mode
- Wi-Fi Functions
- Available Wi-Fi Features
- Sending Images to a Smartphone
- Saving Images to a Computer
- Sending Images to a Registered Web Service
- Printing Images Wirelessly from a Connected Printer
- Sending Images to Another Camera
- Image Sending Options
- Sending Images Automatically (Image Sync)
- Using a Smartphone to View Camera Images and Control the Camera
- Editing or Erasing Wi-Fi Settings
- Setting Menu
- Accessories
- Using the Software
- Printing Images
- Troubleshooting
- Messages
- Specs
- Index
- Warranty
82
Before Use
Basic Guide
Advanced Guide
Index
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
● [ ]: Manual
● Calculation of optimum exposure is based on the specied
metering method (
=
68).
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ] mode.
1
Enter [ ] mode.
● Set the mode dial to [ ].
2
Congure the setting.
● Press the [ ] button, choose [ ] in the
menu, and adjust the setting by either
pressing the [ ][ ] buttons or turning
the [ ] dial (
=
27).
● Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (
=
28)
and choosing [
] tab ► [Flash Settings] ► [Flash Output].
● You can also set the ash level in [
] or [ ] mode by
accessing MENU (
=
28) and choosing [ ] tab ► [Flash
Settings] ► [Flash Mode] ► [Manual].
● You can also access the [Flash Settings] screen (
=
28)
when the ash is up by pressing the [
] button and immediately
pressing the [
] button.