User Manual
54
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
4
Face the camera and wink.
● The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
● To cancel shooting after you have
triggered the self-timer, press the
[
] button.
● If the wink is not detected, wink again slowly and deliberately.
● Winking may not be detected if eyes are obscured by hair, a hat,
or glasses.
● Closing and opening both eyes at once will also be detected as
a wink.
● If winking is not detected, the camera will shoot about 15 seconds
later.
● To change the number of shots, press the [
][ ] buttons
after choosing [
] in step 1. [Blink Detection] (
=
43) is only
available for the nal shot.
● If no one is in the shooting area when the shutter button is
pressed all the way down, the camera will shoot after a person
enters the shooting area and winks.
Auto Shooting after Detecting New Person (Face Self-
Timer)
Still Images
Movies
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(
=
63). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
● Follow steps 1 – 2 in “Specic Scenes”
(
=
49) and choose [ ], and then
press the [ ] button.
● Press the [
][ ] buttons to choose [ ],
and then press the [ ] button.
● You can also shoot as usual by pressing the shutter button.
● The camera can detect smiles more easily when subjects face
the camera and open their mouth wide enough so that teeth are
visible.
● To change the number of shots, press the [
][ ] buttons
after choosing [
] in step 1. [Blink Detection] (
=
43) is only
available for the nal shot.
Auto Shooting after Wink Detection (Wink Self-Timer)
Still Images
Movies
Aim the camera at a person and press the shutter button all the way
down. The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
● Follow steps 1 – 2 in “Specic Scenes”
(
=
49) and choose [ ], and then
press the [ ] button.
● Press the [
][ ] buttons to choose [ ],
and then press the [ ] button.
2
Compose the shot and press the
shutter button halfway.
● Make sure a green frame is displayed
around the face of the person who will
wink.
3
Press the shutter button all the way
down.
● The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
● The lamp blinks and the self-timer sound
is played.