Use and Care Manual
102
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Using WPS-Compatible Access Points” (
=
99).
● To connect to a device via an access point, conrm that the target
device is already connected to the access point, and then follow the
procedure from step 8 in “Using WPS-Compatible Access Points”
(
=
99).
● To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” (
=
99)
from step 5 or the procedure in “Connecting to Listed Access Points”
(
=
101) from step 2.
3
Enter the access point password.
● Press the [ ] button to access the
keyboard, and then enter the password
(
=
28).
● Press the [
][ ] buttons to choose
[Next], and then press the [ ] button.
4
Choose [Auto].
● Press the [ ][ ] buttons to choose
[Auto], and then press the [ ] button.
● To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
(
=
99).
● To determine the access point password, check on the access
point itself or refer to the user manual.
● Up to 16 access points will be displayed. If no access points are
detected even after you choose [Refresh] in step 2 to update the
list, choose [Manual Settings] in step 2 to complete access point
settings manually. Follow on-screen instructions and enter an
SSID, security settings, and a password.
● When you use an access point that you have already connected
to for connecting to another device, [
*
] is displayed for the
password in step 3. To use the same password, press the [
][ ]
buttons to choose [Next], and then press the [
] button.