Use and Care Manual
64
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
2
Choose a subject to focus on.
● Aim the camera so that [ ] is on the
desired subject, and then press the [ ]
button.
● When the subject is detected, the camera
beeps and [
] is displayed. Even if the
subject moves, the camera will continue
to track the subject within a certain range.
● If no subject is detected, [
] is displayed.
● To cancel tracking, press the [
] button
again.
3
Shoot.
● Press the shutter button halfway. [ ]
changes to a blue [ ], which follows
the subject as the camera continues to
adjust the focus and exposure (Servo AF)
(
=
65).
● Press the shutter button all the way down
to shoot.
● Even after your shot, [
] is still displayed
and the camera continues to track the
subject.
● [Servo AF] (
=
65) is set to [On] and cannot be changed.
● Tracking may not be possible when subjects are too small or
move too rapidly, or when subject color or brightness matches
that of the background too closely.
● [AF-Point Zoom] on the [
] tab is not available.
● [
] and [ ] are not available.
● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
● If faces are not detected when Servo AF (
=
65) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
● Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in prole, at an angle, or partly hidden
● The camera may misinterpret non-human subjects as faces.
● No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Still Images
Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
● Follow the steps in “Changing the AF
Frame Mode” (
=
63) to choose
[Tracking AF].
● [
] is displayed in the center of the
screen.