Use and Care Manual
94
Before Use
Basic Guide
Advanced Guide
Wi-Fi Functions
Camera Basics
Auto Mode / Hybrid Auto
Mode
Other Shooting Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Adding a Smartphone Using the Wi-Fi Menu
These steps show how to use the camera as an access point, but you can
also use an existing access point (
=
96).
1
Install Camera Connect.
● For an iPhone, iPad, or iPod touch, nd
Camera Connect in the App Store and
download and install the app.
● For Android smartphones, nd Camera
Connect in Google Play and download
and install the app.
2
Access the Wi-Fi menu.
● Press the [ ] button to turn the camera
on.
● Press the [
] button.
● If the [Device Nickname] screen is
displayed, choose [OK] (
=
93).
3
Choose [ ].
● Press the [ ][ ] buttons to choose [ ],
and then press the [ ] button.
6
Choose the smartphone to connect
to.
● Press the [ ][ ] buttons to choose the
smartphone, and then press the [ ]
button.
● After a connection is established with
the smartphone, the smartphone name
is displayed on the camera. (This screen
will close in about one minute.)
7
Import images.
● Use the smartphone to import images
from the camera to the smartphone.
● Use the smartphone to end the
connection; the camera will automatically
turn off.
● Connections require that a memory card be in the camera.
● You can change the camera nickname displayed on the screen in
step 2 (
=
93).
● For better security, you can display a password on the screen in
step 3 by accessing MENU (
=
27) and choosing [ ] tab >
[Wi-Fi Settings] > [Password] > [On]. In this case, in the password
eld on the smartphone in step 4, enter the password displayed
on the camera.
● One smartphone can be registered to the [
] button. To assign a
different one, rst clear the current one in MENU (
=
27) > [ ]
tab > [Mobile Device Connect Button].
● Not all NFC-compatible smartphones have an N-Mark (
). For
details, refer to the smartphone user manual.