User Manual
28
Placing Thin Paper (Thin Paper Mode)
When placing a document with thin paper, switch the mode of the
scanner to thin paper mode. In thin paper mode, the placed document
is fed in a manner that prevents it from being damaged.
Thin paper mode switching is performed by opening the scanner
driver settings screen.
1
Sets the scanning conditions.
2
Place the document as described in the “Scanning
multiple documents” procedure on p. 25.
Hint
• When scanning multiple page documents that are fastened
together, such as invoices, select the [Non Separation Feeding
Mode] check box in step 4. Also, it is recommended to place
the documents in the scanner one at a time with the edge that
is fastened together facing down.
• When scanning multiple documents of different sizes, the
scanned documents may not be ejected neatly onto the
document eject tray. When scanning such documents, open
the eject tray support.
1
Opens the scanner driver's Detail Settings screen. (See
p. 57)
2
Open the [Feeding] tab.
3
Select the [Thin Paper Mode] check box.
4
Click the [OK] button to close the settings screen.
1
Opens the scanner driver's Detail Settings screen. (See
p. 47)
2
Click the [More] button.
The scanner driver's Detail Settings screen opens.