User Manual

30
Placing Folded Documents
Folio Scan enables you to scan documents that are larger than LTR/
A4 and therefore do not fit in the feeder. To use the function, fold the
document in half lengthwise and place it into the feeder. The DR-
M160II will scan both sides and combine the scanned images into a
single image.
1 Sets the scanning conditions.
2 Fold the document in half.
Crease the document firmly down its center to fold the document
in half. Fold the document so that its edges are neatly aligned. If
the document is not folded properly, paper jams may occur or
distortions may appear in the combined scanned image.
IMPORTANT
A portion of the scanned image will be missing at the fold line.
3 Place the document with the folded edge facing right and
the top edge facing downward.
IMPORTANT
Adjust the document guides to fit the width of the document.
Otherwise, the image may scan as skewed or shifted.
Hint
• The side of the folded document facing you will become the
right side of the combined image.
• The maximum size for the combined image is A2. Use this
method to scan A2-sized documents. When scanning a folded
document of a size other than the standard formats, set [Page
Size] on the scanner driver settings screen to [Match original
size]. (See p. 60)
1 Opens the scanner driver's Detail Settings screen. (See
p. 57)
2 Set [Page Size] on the [Basic] tab to a size that is half that
of the paper to be actually scanned, and set [Scanning
Side] to [Folio].
For example, when scanning a document of A3 size
folded, set [Page Size] to [A4].