User Manual

39
Hint
• You can also start CaptureOnTouch from the Start menu. Click
[Start] – [All Programs] – [Canon DR-M160] – [DR-M160
CaptureOnTouch].
• When [Make CaptureOnTouch resident] is turned on by using the
[Basic settings] tab on the [Environmental settings], this shortens
the time from pressing the scanner start button to the start of
scanning. For details, see “Environmental Settings” on p. 51.
Click (CaptureOnTouch icon) in the menu bar and then click
[Launch CaptureOnTouch] from the menu which appears to start
CaptureOnTouch and display the main window.
Hint
• When [Make CaptureOnTouch resident] is turned on by using the
[Basic settings] tab on the [Environmental settings], this shortens
the time from pressing the scanner start button to the start of
scanning. For details, see “Environmental Settings” on p. 53.
Exiting CaptureOnTouch
Click at the top of the window to close the CaptureOnTouch main
window
. When doing so, the main window closes but CaptureOnTouch
is kept as resident in the system.
To stop CaptureOnTouch being resident in the system, click the
(CaptureO
nTouch iconj in the taskbar, and select [Exit] from the
menu.
CaptureOnTouch becomes no longer resident in the system and the
icon disappears from the taskbar.
To close the CaptureOnTouch window, click at the top of the
window. This closes the window, but CaptureOnTouch will continue to
reside in the system.
click (CaptureOnTouch icon) in the menu bar, and select [Exit]
from the menu.