User Manual

A When you want to specify different scanning conditions for the front

and back pages of a document, select [Skip Blank Page] or [Both]

for [Scanning Side] on the [Basic] tab in advance.

B Specify the number of scanning conditions to apply in [Stream

count of Front]. Up to three can be specified.

C Select [Front 1st], and then open the other tabs and set the

scanning conditions. Depending on the value specified for [Stream

count of Front], configure the remaining [Front 2nd] and [Front 3rd]

in the same way.

D When specifying the scanning conditions of the back, configure the

settings in the same way as described in B to C. In this case,

specify [Stream count of Back], and then set the scanning

conditions for each of [Back 1st] to [Back 3rd].

Hint

The following shows the setting conditions that can be set in the

multistream settings.

To scan barcodes

Installing a barcode module (optional) allows you to scan barcodes in

the document. Click the [Barcode] button on the [Others] tab to

configure barcode scanning conditions.

See Help for details about settings.

Tab Items that can be set

[Basic] tab

[Color mode] and [Dots per inch]

(excluding [Auto-detection] for both)

[Brightness] tab [Brightness] and [Contrast]

[Image processing] tab

[Edge emphasis], [Color dropout], and

[Character Emphasis]

[Feeding] Tab None (all disabled)

[Others] Tab None (only [Use MultiStream] is enabled)