User Manual

90
Auto Power Off Setting
The scanner automatically turns off if 4 hours elapse without scanning
or another operation being performed.
To disable this setting, follow the procedure below.
IMPORTANT
Log on to Windows as an Administrator.
1 Click the Start button, and then click [All Programs],
[Canon DR-M160], and [Canon imageFORMULA Utility].
imageFORMULA Utility starts.
Hint
In Windows 8.1/8, it is registered at the following location.
2 Click [Canon DR-M160 USB] and click [Properties].
Scanner properties are displayed.
3 Click the [Maintenance] tab and then clear the [Turn off
automatically after 4 hours] check box.