User's Manual

DEALING WITH

ABNORMALITIES

WARNING

If any of the following situations occurs, immediately disconnect

the cable and contact your dealer or a Canon representative

listed on the next page.

・Smoke, fumes, or unusual noises

・Entry of foreign objects (such as liquid or metal objects)

inside the product

NOTE

1. Clean off any dust on the lens surface using a lens blower or

a soft lens brush. In case of getting ngerprints or stains on

the lens, use a clean cotton cloth moistened with commercial

lens cleaning uid, or use lens cleaning paper. Gently wipe in

a spiral pattern from the center of the lens. Be careful not to

rub dust across the lens, which may scratch the lens surface.

2. Routine inspection about once a year is recommended,

depending on the conditions and environment of use.

Request overhaul, if needed.

MAINTENANCE AND

INSPECTION

WARNING

Be sure to disconnect the cable and remove the lens from the

camera before cleaning outside of the lens. Do not use benzene,

thinner, or other ammable substances to clean the product.

Otherwise it may cause a re or electric shocks.