Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
Auto Image Rotation
~
••
""IIH.""
••
Vertical shots can be rotated automatically so that they are displayed
upright during playback.
1 Select [Auto rotate].
@ Select the [f1
1]
tab.
@ Press the <
JA..T
> key to select
[Auto
rotate], then press
<@>.
Select [On].
@ Press the <
JA..T
> key to select [On],
then press
<@ >.
Take a vertical shot.
The image review right after image
capture will not display the image
vertically
on
the LCD monitor.
Playback the image.
Press the <[EJ > button.
The vertical shot will
be
displayed
vertically as shown
on
the left.
Auto rotate will work only if [Auto rotate] has been set to [On]. Auto
rotate will not work with vertical images captured while
[Auto rotate] was
[Off]. It will not rotate even if you later switch it to [On] for playback.
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
I.ll
When you change the camera's orientation between horizontal and vertical,
the camera orientation sensor will make a small sound. This is normal and
not a defect.
105