Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
~
Printing with CP Direct
Set the trimming.
f!}
Set as necessary.
For details on trimming, see page
135.
Start printing.
Press the <
...
> key to select [Print],
then press
<8 >.
The printing will start.
When the printing ends, the screen
will return to step
1.
To
stop the printing, press < 8 > while
[Stop]
is
displayed, then select [OK]
and press
<8>.
The date may look light if it is imprinted on a bright background or border.
If
[Multiple] is selected, [Borders] and [Date] cannot be selected.
[Borderless] will be set and [Date] will be set to [Off]. The image will
also be cut off along all four edges.
If
[Date] is [On], the date recorded for the image will appear on the
print.The date will appear on the lower right of the image.
If you select
[Stop] while printing only one image, the printing will not
stop until it finishes printing the image. If you are printing multiple
images, the printing will stop after the current image is finished printing.
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select
[Stop] or [Resume] (after resolving the
problem). If
[Resume]
is
not displayed, select [Stop].
131