Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
mDirect Printing with Bubble Jet Direct
Start printing.
Press the <
Jr..T
> key to select [Print],
then press
<@ >.
The printing will start.
When the printing ends, the screen
will return to step
1.
To
stop the printing, press <
@>
while
[Stop] is displayed, then select [OK]
and press
<@>.
o If [Borders] is set, the date might be imprinted on the border, depending on
the printer.
[]]
If [Date] is [On], the date recorded for the image will appear on the print.
The date will appear on the lower right of the image.
If you select
[Stop] during the printing, the printing will stop and the
paper will be discharged.
If a problem occurs during printing, an error message will appear on the
camera's LCD monitor. Select
[Stop] or [Continue]. If you select
[Continue] and the printer does not resume printing, it will resume
automatically after you resolve the problem.
If you are using a
BJ
printer equipped with an operation display panel,
the error
No.
will be displayed
if
an error occurs.
To
resolve the respective
error, refer to the
BJ
printer's instruction manual.
134