Owner's Manual

Ii!iI3mJ Direct Printing with DPOF
mcp Direct I [!j Bubble Jet Direct
Set the [Style]. (p.129/132)
Start printing.
Press the < • ." > key to select [OK],
then press
<8>.
The printing will start.
To stop the printing, press < 8 > while
[Stop] is displayed, then select [OK]
and press
<8>.
When printing with a PictBridge or Bubble Jet Direct printer, be sure to
set the paper size.
With PictBridge, the file No. cannot be imprinted.
If
[Bordered] is set, the date might be imprinted on the border,
depending on the printer.
The date might look light if it is imprinted on a bright background or
border.
With
CP Direct, if [Print type] is set to [Index], the number of images
printed on one index sheet will be as follows:
• Credit card size:
20 images • L size: 42 images
• Postcard size: 63 images
As for the number of index images with Bubble Jet Direct, see the BJ
printer's instruction manual.
If you stopped the printing and want to resume printing the remaining
images, select
[Resume]. Note that printing will not resume if you stop
the printing and do any of the following:
• Before resuming the printing, you changed the print order settings.
• Before resuming the printing, you erased
an image that was to be printed.
• In the case of index printing with CP Direct, you changed the paper
cassette before resuming the printing.
•
In the case of index printing with PictBridge, you changed the paper
settings before resuming the printing.
• When you stopped the printing, the
CF card's remaining capacity was
low.
If there is a printing problem, see page 128 for PictBridge, page
131 for
CP Direct,
or page 134 for Bubble Jet Direct.
144