Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
Troubleshooting Guide
The image
is
out
of
focus.
(iJ)
The lens focus mode switch
is
set
to
<MF>.
~
Set the lens focus mode switch to <AF>. (p.25)
1jl Camera shake occured when you pressed
the
shutter button.
~
To
prevent camera shake, hold the camera still and press the
shutter button gently. (p.28, 42)
The
CF
card cannot be used.
[Err
**]
is
displayed on the LCD panel.
~
If
it is [Err CF], see page 118.
If
it is [Err 02], see page 157.
@j
You
are using a non-Canon CF card.
..
Using Canon CF cards is recommended. (p.159)
Image Review & Operation
The image cannot be erased.
The image is erase-protected.
Cancel the protection. (p.115)
The wrong shooting date and time
is
displayed.
The correct date and time has
not
been set.
~
Set the correct date and time. (p.37)
No image appears on the TV screen.
Video cable
plugs
are
not
inserted all the way.
Insert the video cable plugs all the way in. (p.114)
$ The correct video format (NTSC
or
PAL) has not been set.
Set the camera to the correct video format matching the TV set.
(p.34)
You
are not using the video cable
that
came with the camera.
Use the video cable that came with the camera. (p.114)
156