Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
Troubleshooting Guide
Direct Printing
The images cannot be printed.
1jl)
The camera is
not
properly connected
to
the printer.
~
Use the specified cable to properly connect the camera to the
printer. (p.121)
I'af
The printer is not turned on.
~
Turn on the printer.
Error Codes rmmrmrrmg A
HS
i
1l1l1!11l11'1PT'1
p;w
If
a camera error occurs, "Err
xx"
will be displayed
on
the LCD panel.
Follow the countermeasures below to resolve the problem for
respective error code.
If
the same error occurs often, something is probably wrong with the
camera. Jot down the "xx" error code and contact your nearest Canon
Service Center.
If
an error code appears after you take the picture, the camera might
have missed the shot. Press the
dEl>
button to see if the image
appears on the LCD monitor.
Error Code
Countermeasures
Err
01
Communications between the camera and lens is faulty.
Clean the lens contacts. (p.9)
There is a problem with the CF card. Try any of the following:
Err
02
Remove and re-insert the CF card. Format the CF card. Use a
different CF card.
Err 04
The CF card is full. Erase unnecessary images
in
the card or
replace the CF card.
Something obstructed the built-in flash's automatic pop-up
Err 05
operation.
Turn the power switch to
<OFF>
and
<ON>
again.
An error other than the above has occurred.
Err 99
Remove and re-install the battery.
This error may occur if you use a non-Canon lens and the
camera
or
lens does not operate properly as a result.
157