Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
Replacing the DatelTime Battery Mt. '
.....
The date/time (back-up) battery maintains the camera's date and time.
The battery's service life
is
about 5 years. If the date/time
is
reset when
the battery
is
replaced, replace the back-up battery with a new CR2016
lithium battery as described below.
The date/time setting will also be reset, so you must set the
correct date/time.
Set the power switch to
<OFF>.
Open the cover and remove the
battery.
Take out the battery holder.
Replace the battery.
Make sure the battery
is
in
the proper
+ - orientation.
Insert the battery holder and
close the cover.
--
For the date/time battery, be sure to use a CR2016 lithium battery.
38