Owner's Manual
Table Of Contents
- Owners Manual
- Time / Date Set
- Supplied Accessories
- Conventions Used in This Manual
- Quick Start
- Table of Contents
- Parts & Controls
- Getting Started
- Attaching the Strap
- Charging the Battery
- Installing / Removing the Battery
- Battery Status Indicator
- Mounting / Detaching a Lens
- Installing / Removing a CF Card
- Basic Operation
- Menu Operation
- Language Set
- Time / Date Set
- Replacing Date / Time Battery
- Cleaning CMOS Sensor
- Auto-Off
- CF Card Reminder
- Adjusting Viewfinder
- Holding the Camera
- Basic Operation
- Menu Operation
- Shooting in AUTO Mode
- Image Settings
- Setting AF / Metering / Drive Modes
- Advanced Operations
- Using a Flash
- Image Playback
- Direct Printing from the Camera
- DPOF
- Customizing the Camera
- Function Availability Chart
- Troubleshooting
- Error Codes
- Specs
- Index
- Pocket Reference Guide
- Battery Pack Info
- EF Zoom Lens Info
- Arcsoft Photo Studio Info
- Software Quick Start Guide
- Scans of Supplied CD-ROMS
- Note - Install Software Before Connecting to Computer
- Note - Use Genuine Canon Accessories
- Canon EOS Brochure
- Warranty
Basic Zone Modes
This
is
for fast-moving subjects when you
want to freeze the action.
The camera will first track the subject with the center
AF point. Focus tracking will then continue
with
any
of the seven
AF
points covering the subject.
While you press the shutter button, focusing will
continue for continuous shooting.
Using a telephoto lens is recommended.
When focus
is
achieved, the beeper will sound
softly.
The
AF
mode will be set to
<AI
SERVO>,
the drive
mode will be set to
<
~
>, and the metering mode
will be set to
<
[~J
> automatically.
This mode
is
for shooting people outside at
twilight or at night. The flash illuminates the
subject and a slow sync speed captures a
natural-looking exposure of the background.
If you want to shoot a night scene without people,
use the
<A&>
mode instead.
Tell
the subject to
keep
still
even
after the flash fires.
The
AF
mode will be set to <
ONE
SHOT
>,
the
drive mode will be set to
<0>,
and the metering
mode will be set to
<[~J>
automatically.
You
can disable the flash when you do not
want it to fire.
The
built-in flash
or
any external Speedlite will
not fire.
The
AF
mode will be set to
<AI
FOCUS>,
the drive
mode will be set to
<0>,
and the metering
mode will be set to
<
[~J
> automatically.
4)
In
the
<~>
mode,
use
a tripod
to
prevent camera shake.
In
the <A&> or
<l:n>
mode, if the shutter speed display blinks,
be
aware that camera shake
may
occur.
47