Owner's Manual

Setting the Image-recording Quality
The. L/'" L/. M/'" MI. 51'" 5 modes record the image in the
widely-used JPEG. In the IiJlWj mode, the captured image will require
post-processing with the software provided. In the IiJlWj +. L
(RAW+JPEG) mode, the image is recorded in both the RAW and JPEG
simultaneously. Note that IiJlWj and IiJlWj +. L cannot be selected
in
the Basic Zone modes.
Select [Quality].
Select the [01] tab.
Press the <.T > key to select
[Quality], then press <@>.
The recording quality screen will appear.
Set the desired recording quality.
Press the < <ll:~ > key to select the desired
recording quality, then press <@>.
When you press the shutter button
halfway, the image-recording quality
will be displayed on the LCD panel.
Image-recording Quality Settings
•
(Large Fine)
3456 x 2304
.II L (Large Normal)
(Approx. 8 million)
• M (Medium Fine)
JPEG
2496 x 1664
A5 -A4
.II M (Medium Normal)
(.JPG)
(Approx. 4.15 million)
• S (Small Fine)
1728 x 1152
A5 or smaller
.II S (Small Normal)
(Approx. 2 million)
~(RAW)
RAW 3456 x 2304
A3 or larger
(.CR2)
(Approx. 8 million)
[i] The • (Fine) and .II (Normal) icons indicate the image's compression
rate. For better image quality,
select. for low compression. To record
more images on the memory card, select a higher compression ....
With
RAW+. L, the RAW and JPEG images will be saved under the
same file
No. in the same folder.
52