Owner's Manual

White Balance Auto Bracketing *
With just one shot, three images having a different color hue can be recorded
simultaneously. Based on the white balance mode's color temperature, the image
will be bracketed with a blue/amber bias or magenta/g reen bias. This is called
white balance bracketing. It can be set up to ±3levels in single-level increments.
SIA bias ±3 levels
MIG bias ±3 levels
60
Set the image-recording quality to
a setting other than
RAW and
RAW+. L. (p.52)
Select [WB SHIFT/BKT].
Select the [02] tab.
Press the <
Ji..T > key to select [WB
SHIFT/BKT], then press <8>.
The WB correctionlWB bracketing
screen will appear.
Set the bracketing amount.
Turn the <B > dial to set the bracketing
direction and bracketing level.
When you turn the <B> dial, the "."
mark on the screen will change to
"
••• " (3 points). Turning the <B>
dial to the right sets the BI A
bracketing, and turning it to the left
sets the MIG bracketing.
Set the bracketing level for the
BI A or
MIG bias up to ±3 levels in single-
level increments. (The bracketing
level cannot be set for both the
BI A
and MIG bias at the same time.)
On the right side of the screen,
"BKT"
indicates the bracketing direction and
bracketing level.
Press <
8 > to exit the setting and
return to the menu.