SDS

MATERIAL SAFETY DATA SHEET Page 2 of 5
MSDS#: BA0092-01-110803
Date of Issue: September 8, 2011 Revised Date: -
Ver. 2009/6/01
Inhalation: Remove to fresh air immediately. Take a medical treatment.
SECTION 5 FIRE FIGHTING MEASURES
Extinguishing method: Since vapor, generated from burning batteries may make eyes, nose and throat irritate, be sure to
extinguish the fire on the windward side. Wear the respiratory protection equipment in some cases.
Fire extinguishing agent: Plenty of water and alcohol-resistant foam are effective.
SECTION 6 MEASURES FOR ELECTROLYTE LEAKAGE FROM THE BATTERY
Take up with absorbent cloth.
Move the battery away from the fire.
SECTION 7
PRECAUTION FOR HANDLING AND STORAGE
-When packing the batteries, do not allow battery terminals to contact each other, or contact with other metals. Be sure to pack
batteries by providing partitions in the packaging box, or in a separate plastic bag so that the single batteries are not mixed together.
(1)(2) (3)
-Use strong material for packaging boxes so that they will not be damaged by vibration, impact, dropping and stacking during their
transportation. (1)(2)(3)
-Do not let water penetrate into packaging boxes during their storage and transportation.
-The batteries will be stored at room temperature, charged to about 30－50% of capacity.
-Do not store the battery in places of the high temperature exceeding 35 deg. C or under direct sunlight or in front of a stove. Please
also avoid the places of high humidity. Be sure not to expose the battery to condensation, water drop or not to store it under frozen
condition.
-Batteries are sure to be packed in such a way as to prevent short circuits under conditions normally encountered in transport.
(1)(2)(3)
-Please avoid storing the battery in the places where it is exposed to the static electricity so that no damage will not be caused to the
protection circuit of the battery pack.
SECTION 8 EXPOSURE CONTROL / PERSONAL PROTECTION
(IN CASE OF ELECTROLYTE LEAKAGE FROM THE BATTERY)
Acceptable concentration: Not specified in ACGIH. (4)
Facilities: Provide appropriate ventilation system such as local ventilator in the storage place.
Protective clothing: Gas mask for organic gases, safety goggle, safety glove.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES OF SINGLE CELL
Appearance: Single cell: Cylindrical or Prismatic cell
Nominal voltage: Single cell: 3.6 volts