User Manual

175
Menu Options
1
In mode, not available in some index screens and playback modes.
2
The default value depends on the country/region or purchase.
3
Setting options for [Assignable Buttons]: [(NONE)], [ONE-SHOT AF], [AF LOCK], [Face AF], [PUSH AUTO IRIS], [Iris Mode],
[Iris +], [Iris -], [AE Shift +], [AE Shift -], [Backlight], [Spotlight], [ISO/GAIN], [SHUTTER], [View Assist.], [HDMI LUT], [PEAKING],
[ZEBRA], [WFM], [MAGN.], [DISP.], [Color Bars], [Markers], [OLED Setup], [Viewfinder Setup], [OLED/VF B&W], [Onscreen
Display], [Time Code], [Time Code Hold], [Headphone +], [Headphone -], [Speaker +], [Speaker -], [Monitor Channels], [Audio
Level], [Photo], [My Menu], [Initialize Media], [ Up], [ Down], [ Left], [ Right], [ SET], [STATUS], [WB SET], [WB],
[CUSTOM PICTURE], [User Setting (NONE)].
The default settings are as follows. [1] to [6]: [(NONE)], [7] and [8]: [MAGN.], [9]: [PEAKING], [10]: [ZEBRA], [11]: [AF LOCK], [12]:
[PUSH AUTO IRIS], [13]: [ISO/GAIN], [14]: [SHUTTER], [15]: [ONE-SHOT AF], [16]: [WFM], [17]: [DISP.]
4
Depending on the video configuration, the frame rate may be set automatically. See the function description for details.
[Reset]: Reset various camcorder settings.
[All Settings]: Resets all the camcorder’s settings to default settings, except for the hour meter.
[Camera Settings] ( mode only) : Resets the white balance, iris, ISO speed, gain, shutter speed,
[~ Camera Setup] settings and custom picture settings to default settings.
[Assignable Buttons]: Resets the assignable buttons to default settings.
[Tally Lamp] ( mode only) : Allows you to set whether the front and rear tally lamps illuminate while the
camcorder is recording.
[Media Access LED]: Allows you to set whether the respective SD card access indicator illuminates while the
camcorder is accessing an SD card.
[Delete Last Clip] ( mode only) : Deletes the last clip you recorded. This menu option will not be available if
you turned the camcorder off since recording the last clip.
[Reset Hour Meter]: The camcorder has two “hour meters” – the first keeps track of total operation time and the
second keeps track of operation time since the last time the second hour meter was reset with this function.
[Firmware] ( mode only) : You can verify the current version of the camcorder’s firmware. This menu option is
usually unavailable.
[ My Menu] ( mode only)
[Network Settings] [Connection Settings]
[Set Up New]
[Infrastructure], [Camera Access Point] 146,
149
[Select] [No.1] to [No.5] 151
[Edit] [Settings], [Rename] 152
[Remote Settings] – 153
[FTP Server Settings] –
158
[FTP Transfer Settings]
[Create Folder by Date] [On], [Off]
[Same Named Files] [Skip], [Overwrite]
[GPS Auto Time] [On], [Off] 103
[Initialize Media] [8A] [Complete], [Quick]
42
[8B]
[Certification Logos] – –
[Lens Firmware] – 33
[Firmware] – –
Menu item Submenu Setting options A
[Edit] [Register] [Cancel], [OK] 29
[Move] [Cancel], [OK]
[Delete] [Cancel], [OK]
[Reset All] [Cancel], [OK]
Menu item Submenu Setting options A
COPY