User Manual

Recording Video

Onscreen Displays

Refer to this section for an explanation of the various screen displays that appear in mode. You can use

the custom display function (A 122) to turn off individual onscreen displays if they are not required. In the

following table, the "Custom Display" column indicates whether the icon can be turned off through [£ OLED/

VF Setup] > [Custom Display 1] or [Custom Display 2] (indicated by "1:" or "2:", respectively) and the name of

the custom display submenu name.

When displaying the date and time (

A 172):

Number Icon/Display Description Custom Display A

1 è  é  ê 

ë  ì (in red)

000 min

Remaining battery charge

The icon shows an estimate of the remaining charge. When using a

battery pack compatible with Intelligent System, the remaining time is

displayed, in minutes, next to the icon.

• When ì is displayed, replace the battery pack with a fully

charged one.

• Depending on the conditions of use, the actual battery charge may

not be indicated accurately.

[Remaining Battery]

–

2 SD card status and available recording time estimate 2:

[Remaining Rec Time]

–

200 min, 300 min Can record on SD card

The SD card selected for recording is indicated with a Ð mark.

4, 5 (in red) No SD card or cannot record on the SD card.

3 400 min Remaining recording time for double slot recording (A 43): in green -

can record; in yellow - the SD card is almost full; in red - cannot record.

4CONT 00:00:00 Recording time for continuous recording (A 98)

4 00 mm Current focal length of an attached EF lens.

• The displayed value is an estimate.

1: [Focal Length] –

5 b (in yellow/red), ` Temperature warning/Fan operation.

• When the camcorder’s internal temperature is high, b will appear in

yellow. If the temperature rises further due to continued use, it will

change to red and the fan may be activated automatically.

2: [Temperature/Fan] 52

1312 14 15 16 17

30 3529 3332 3427

COPY