User Manual
White Balance
70
Remote Operation Using Browser Remote
After completing the necessary preparations (A 153), you can adjust the white balance remotely from a Wi-Fi-
enabled device using the Browser Remote application.
1 Press [ÅA] on the Browser Remote screen.
2 Select the desired white balance mode.
• For auto white balance, select [Ã].
If you selected , ¼ or :
3 Press the adjustment value [ ±0] (¼, ) or color temperature [5500K] ( ) and then select the
desired value from the list.
• You may need to scroll up/down to see all the available values.
• The selected value will be displayed on the Browser Remote screen and will be applied on the camcorder.
If you selected ÅA or ÅB:
3 Point the camcorder at a gray card or white object so that it fills the whole screen.
• Use the same lighting conditions you plan to use when recording.
• Make sure the gray card or white object fills the screen until the procedure is completed.
4 Press [Å].
• If a custom white balance has not yet been stored, [Å] will flash slowly.
• During the procedure, [Å] will flash quickly. When it stops flashing, the procedure is completed and the
setting will be applied on the camcorder.
Color temperature
White balance fine-tuning
COPY