User Manual

79
Onscreen Markers and Zebra Patterns
NOTES
• You can turn off all other onscreen displays, leaving only the onscreen markers (A 52).
• If you set an assignable button to [Markers] (A 107), you can press the button to turn the onscreen markers
on and off.
Displaying Zebra Patterns
The camcorder has a zebra pattern feature that shows black and white
diagonal stripes over areas that are overexposed. This is displayed only
on the screen and will not appear in your recordings. There are two
types of zebra patterns and you can display both simultaneously. Zebra
1 lets you identify areas within a certain range (±5% of a specified level)
while zebra 2 lets you identify areas that are over a specified level.
When you display both simultaneously and they overlap, only zebra 1
will be displayed in those areas.
1 Open the zebra pattern [Select] submenu.
[£ OLED/VF Setup] > [Zebra] > [Select]
2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press the
joystick.
3 Open the zebra level submenu.
[£ OLED/VF Setup] > [Zebra] > [Zebra 1 Level] or [Zebra 2
Level]
4 Select a zebra level and then press the joystick.
5 Press the ZEBRA button to activate the selected zebra
pattern.
• Alternatively, before closing the menu, you can also select
[Setting], select [On] and then press the joystick.
NOTES
• You can use the [£ OLED/VF Setup] > [Zebra] > [HD Output] setting to display the zebra pattern on an
external monitor connected to the HDMI OUT terminal (HD output only), except when the output signal is
1080/59.94P or 1080/50.00P.
Center marker
Grid
[£ OLED/VF Setup]
[Zebra]
[Select]
[Zebra 1]
COPY