User Manual

4 MODE SETTING

4-1. OPERATION MODES

This product has an information display on which various settings can be customized. There are three

operation modes below as a setting menu. One of the operation modes can be selected according to

usage and preference.

1. Basic mode: Items that can be set and viewed are limited in this mode, and are recommended to

users who do not require sophisticated settings. This product is factory-set to basic

mode.

2. Full mode: All items can be set and viewed in this mode.

3. Analog mode: It is the mode chosen when not using a digital function at all.

This manual describes only the items that can be set on the Top screen in each mode.

For details on how to set them, refer to the "Information Display Manual" on the supplied CD-ROM.

4-2. SETTINGS IN BASIC MODE

The following nine settings can be made on the Top screen in Basic Mode.

1. Go to MENU screen

2. Auto iris gain settings

3. AUX switch assignment

4. Automatic adjustment of mechanical end

5. AUX1 switch assignment

6. Zoom tracking ON/OFF

7. AUX2 switch assignment

8. Iris torque settings

9. Zoom curve mode settings

For details on how to set each setting item, refer to "Information Display Manual" on the supplied CD-ROM.

[Trk]

OFF

Shtl

A 1

A 2

IG: 50

Fr1P

[I-Tq]H

[Adj]

Initial Top screen in Basic Mode

[ Z.M. ]

A 2

A 1

Fr1P

IG: 50

Fr1P

[Trk]

OFF

[I-Tq]H

Items displayed by scrolling

Items not scrolled