User Manual
E19
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
6 HOW TO ATTACH AND DETACH THE DRIVE UNIT
This product is structured so that the drive unit can be separated from the lens body. If it is used as a manual
lens, detach the drive unit while referring to Section 6-1. If the drive unit is mounted again, mount it while
referring to Section 6-2.
6-1. HOW TO DETACH THE DRIVE UNIT
1 Turn the camera and the lens power off.
2 Disconnect the 12-pin cable.
3 Detach the lens body from the camera.
4 Loosen the three drive unit î‚¿xing screws and detach the
drive unit from the lens body.
5 Cap the contact on the lens body.
If power is supplied from the camera when the PL
mount
lens is used, remove the 12-pin cable and then cap the
connector.
Cap