User Manual
Table Of Contents
- Important Usage Instructions
- Highlights of the XC10
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Taking Photos
- Video Configuration: Movie Format (MXF/MP4), Resolution (4K/HD), Frame Rate and Bit Rate
- Shooting Modes
- Automatic Gain and ISO Limits
- Exposure
- Light Metering Mode
- White Balance
- Using Looks
- Zooming
- Adjusting the Focus
- Image Stabilizer
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- User Bit
- Recording Audio
- Using Commercially Available Microphones
- Audio Scenes (Built-in Microphone)
- Audio Recording Level
- Wind Screen (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone)
- Audio Equalizer (Built-in Microphone)
- Microphone Directionality (Built-in Microphone)
- Microphone Attenuator (External Microphone)
- Low Cut Filter (External Microphone)
- Switching the Input
- Audio Limiter
- Audio Compressor
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Recording GPS Information (Geotagging)
- Slow & Fast Motion Mode
- Pre-recording Mode
- Interval Recording Mode
- Self Timer
- Orientation Detection
- Using an Optional Speedlite Flash
- 4. Customization
- 5. Playback
- Playback
- Playing Back Recordings
- Changing the Index Screen
- Onscreen Icons and Displays during Playback
- Playback Controls during Clip Playback
- Playback Controls during Photo Playback
- Adjusting the Volume
- Displaying Clip Information
- Playing an HD-sized Clip from a 4K Clip
- Capturing Photos from 4K Clips (4K Frame Grab) and HD Clips
- Magnifying Photos during Playback
- Deleting Recordings
- Playback
- 6. External Connections
- 7. Wi-Fi Functions
- 8. Additional Information
![](/manual/canon/0565c002/user-manual-english/images/img-122.png)
Wireless Connections Using Wi-Fi
122
Menus
Table of Contents Index
5 Within 2 minutes, touch [OK] on the camcorder’s screen.
• While the camcorder is attempting to connect to the access point, you can touch [Stop] and then [OK] to
interrupt the operation.
6 When the confirmation screen appears, touch [OK] and then touch [X].
NOTES
• The [WPS: Button] method may not work correctly if there are several active access points in the area. In such
case try using [WPS: PIN Code] or [Search for Access Points] (A 122) instead.
WPS using a PIN code
1 Press the MENU button.
2Open the [— Access Point Connection] screen.
[— Wi-Fi Setup] > [1] > [Access Point Connection]
3 Touch [Not Configured] and then touch [WPS: PIN Code].
• After approximately 7 or 8 seconds, the camcorder will generate and
display a PIN code.
4 Enter the PIN code from step 3 into the wireless router’s WPS (PIN code) setup screen.
• For most wireless routers, you must use a Web browser to access the setup screen.
• For details about how to access your wireless router’s settings and activate the Wi-Fi Protected Setup
(WPS) using a PIN code, refer to the instruction manual of your wireless router.
5 Within 2 minutes, touch [OK] on the camcorder’s screen.
• While the camcorder is attempting to connect to the access point, you can touch [Stop] and then [OK] to
interrupt the operation.
6 When the confirmation screen appears, touch [OK] and then touch [X].
Searching for Access Points
The camcorder will automatically detect access points in the vicinity. After you select the desired access point,
you only need to enter the selected network’s encryption key (password) to connect the camcorder.
1 Press the MENU button.
2Open the [— Access Point Connection] screen.
[— Wi-Fi Setup] > [1] > [Access Point Connection]
3 Touch [Not Configured] and then touch [Search for Access
Points].
• The camcorder will search for active access points in your area and
display a list of available options.
[— Wi-Fi Setup]
[1]
[Access Point Connection]
[— Wi-Fi Setup]
[1]
[Access Point Connection]