User Manual
Table Of Contents
- Important Usage Instructions
- Highlights of the XC10
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Taking Photos
- Video Configuration: Movie Format (MXF/MP4), Resolution (4K/HD), Frame Rate and Bit Rate
- Shooting Modes
- Automatic Gain and ISO Limits
- Exposure
- Light Metering Mode
- White Balance
- Using Looks
- Zooming
- Adjusting the Focus
- Image Stabilizer
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- User Bit
- Recording Audio
- Using Commercially Available Microphones
- Audio Scenes (Built-in Microphone)
- Audio Recording Level
- Wind Screen (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone)
- Audio Equalizer (Built-in Microphone)
- Microphone Directionality (Built-in Microphone)
- Microphone Attenuator (External Microphone)
- Low Cut Filter (External Microphone)
- Switching the Input
- Audio Limiter
- Audio Compressor
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Recording GPS Information (Geotagging)
- Slow & Fast Motion Mode
- Pre-recording Mode
- Interval Recording Mode
- Self Timer
- Orientation Detection
- Using an Optional Speedlite Flash
- 4. Customization
- 5. Playback
- Playback
- Playing Back Recordings
- Changing the Index Screen
- Onscreen Icons and Displays during Playback
- Playback Controls during Clip Playback
- Playback Controls during Photo Playback
- Adjusting the Volume
- Displaying Clip Information
- Playing an HD-sized Clip from a 4K Clip
- Capturing Photos from 4K Clips (4K Frame Grab) and HD Clips
- Magnifying Photos during Playback
- Deleting Recordings
- Playback
- 6. External Connections
- 7. Wi-Fi Functions
- 8. Additional Information
![](/manual/canon/0565c002/user-manual-english/images/img-128.png)
Browser Remote: Controlling the Camcorder from a Network Device
128
Menus
Table of Contents Index
Connecting the Network Device
1 Network device: Activate Wi-Fi in the settings screen.
• Detected networks appear on the screen.
2 Network device: Touch the SSID that matches the one displayed on the camcorder’s screen.
3 Network device: Enter the password displayed on the camcorder’s screen to establish a connection.
• Entering the password is necessary only the first time you use this function.
4 Network device: Start the Web browser and enter the URL displayed on the camcorder’s screen.
• The Browser Remote screen will appear.
• While Browser Remote is correctly connected to the camcorder, the above the time code will turn on
one by one and then turn off in an endless loop.
• If a camcorder ID has been set, it will appear on the Browser Remote screen while live view is not activated.
It will not appear if the camcorder’s ID has not been set.
• As long as you do not change the port setting, the URL is always the same so you may find it convenient to
bookmark the URL.
5 Camcorder: Touch [X].
• When the connection has been established, will appear on the screen in white. It will appear in yellow
when a network device is not connected.
6 Select the language for Browser Remote.
• Press the [Î] next to the language button and select the desired language from the
list. Most buttons and controls emulate physical controls on the camcorder and are
labeled in English only, regardless of the language selected.
7 Use the Browser Remote controls to operate the camcorder.
• Descriptions of the controls are given in the following pages. Detailed operation is
given in each function’s reference page.
8 When you have finished using Browser Remote, on the camcorder set
[— Wi-Fi Setup] > [1] > [Browser Remote] to [Off] and then touch [X].
• will turn yellow and then disappear from the camcorder’s screen and the
connection with the application will be terminated.
Language selection
Camcorder ID
Network connection
indicator