User Manual
Table Of Contents
- Important Usage Instructions
- Highlights of the XC10
- Table of Contents
- 1. Introduction
- 2. Preparations
- 3. Recording
- Recording Video and Taking Photos
- Video Configuration: Movie Format (MXF/MP4), Resolution (4K/HD), Frame Rate and Bit Rate
- Shooting Modes
- Automatic Gain and ISO Limits
- Exposure
- Light Metering Mode
- White Balance
- Using Looks
- Zooming
- Adjusting the Focus
- Image Stabilizer
- Onscreen Markers and Zebra Patterns
- Setting the Time Code
- User Bit
- Recording Audio
- Using Commercially Available Microphones
- Audio Scenes (Built-in Microphone)
- Audio Recording Level
- Wind Screen (Built-in Microphone)
- Microphone Attenuator (Built-in Microphone)
- Audio Equalizer (Built-in Microphone)
- Microphone Directionality (Built-in Microphone)
- Microphone Attenuator (External Microphone)
- Low Cut Filter (External Microphone)
- Switching the Input
- Audio Limiter
- Audio Compressor
- Monitoring the Audio with Headphones
- Colors Bars/Audio Reference Signal
- Recording GPS Information (Geotagging)
- Slow & Fast Motion Mode
- Pre-recording Mode
- Interval Recording Mode
- Self Timer
- Orientation Detection
- Using an Optional Speedlite Flash
- 4. Customization
- 5. Playback
- Playback
- Playing Back Recordings
- Changing the Index Screen
- Onscreen Icons and Displays during Playback
- Playback Controls during Clip Playback
- Playback Controls during Photo Playback
- Adjusting the Volume
- Displaying Clip Information
- Playing an HD-sized Clip from a 4K Clip
- Capturing Photos from 4K Clips (4K Frame Grab) and HD Clips
- Magnifying Photos during Playback
- Deleting Recordings
- Playback
- 6. External Connections
- 7. Wi-Fi Functions
- 8. Additional Information
![](/manual/canon/0565c002/user-manual-english/images/img-31.png)
31
Date, Time and Language Settings
Menus
Table of Contents Index
NOTES
• An adjustment dial will appear when adjusting some functions. To use touch panel controls, drag your finger
left/right to move the adjustment dial to the desired setting. To use the joystick, first press the joystick itself so
that the position of the current setting is highlighted in orange and then push left/right to adjust the setting.
Setup Menus
To use touch panel controls
1 and modes only: Touch [FUNC.].
2Touch [MENU].
• Alternatively, you can press the MENU button to open the setup
menus directly.
• The setup menus appear. Settings are divided into groups, which can
be accessed through the tabs at the top of the screen.
3 Touch the tab of the desired menu.
• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers
under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.
4 Touch the desired setting.
• Menu items not available appear grayed out.
5 Touch the desired option and then touch [X].
• You can touch [X] to close the menu at any time.
• You can touch [K] to return to the previous screen. If you changed a setting, it will be applied.
To use the joystick
1 and modes only: Push the joystick (Ý/Þ) to select [FUNC.] and then press the joystick.
2 Push the joystick (Ý/Þ) to select [MENU] and then press the joystick.
• Alternatively, you can press the MENU button to open the setup menus directly.
• The setup menus appear. Settings are divided into groups, which can be accessed through the tabs at the
top of the screen.
3 Push the joystick (Þ) to select the desired tab and page number.
• Depending on the operating mode, some tabs may be divided into multiple “pages”. Touch the numbers
under the tab icons or drag your finger left/right to switch to other pages in the currently selected tab.
4 Push the joystick (Ý) to move the selection bar to the desired setting and then press the joystick.
• Menu items not available appear grayed out.
5 Push the joystick (Ý/Þ) to select the desired option and then press the joystick.
6 Push the joystick (Ý/Þ) to select [X] and then press the joystick.
• You can press the MENU button to close the menu at any time.
• You can select [K] to return to the previous screen. If you changed a setting, it will be applied.
NOTES
• For brevity’s sake, references in the text to settings in the setup menus will include only the tab of the desired
menu and the setting name. For example, “You can adjust the date and time later on with the [ System
Setup] > [1] > [Date/Time] setting.”
• Depending on the operating mode, you may need to switch pages under the tab to access the function.
Operating modes: