Owner's Manual

78
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
Tv, Av, and M Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
P Mode
Changing the Flash Timing
Still Images Movies
Change the timing of the ash and shutter release as follows.
● Press the [ ] button, choose [Flash
Control] on the [ 3] tab, and then
choose [Built-in ash settings].
● Choose [Shutter Sync.], and then choose
the desired option (
=
32).
1st curtain The ash res immediately after the shutter opens.
2nd curtain The ash res immediately before the shutter closes.
● [1st curtain] is used whenever the shutter speed is 1/100 or faster,
even if you select [2nd curtain].
Changing the Flash Metering Mode
Still Images Movies
[Evaluative] ash metering, which enables standard ash exposure, can
be changed to average ash metering across the metering area, as when
using an externally metered ash.
● Press the [ ] button and choose
[Flash Control] on the [ 3] tab. Choose
[E-TTL II meter.] and then [Average].
Shooting with the FE Lock
Still Images Movies
Just as with the AE lock (
=
64), you can lock the exposure for ash
shots.
1
Raise the ash and set it to [ ]
(= 76).
2
Lock the ash exposure.
● Aim the camera at the subject to shoot
with the exposure locked, and then press
the [ ] button.
● The ash res, and when [ ] is displayed,
the ash output level is retained.
● To unlock FE, press the [ ] button again.
[ ] is no longer displayed.
3
Compose the shot and shoot.
● FE: Flash Exposure
● The metering range is shown by a circle in the center of the
screen when FE is locked.
● [ ] blinks when standard exposure is not possible (even if the
ash res in step 2). Follow step 2 when subjects are within range
for ash shots.