User's Manual

You can set the flash output from 1/1 full output to 1/128 power in 1/3-

step increments.

Use a flash meter (commercially available) to determine the required

flash output to obtain a correct flash exposure. Setting the camera’s

shooting mode to <W> or <q> is recommended.

Set the flash mode to <q>.

Press the <E> button of the

<S> cross keys.

Turn <9> to select <R>, then

press <8>.

Set the flash output.

Press the <O> button of the <S>

cross keys.

Turn <9> to set the flash output,

then press <8>.

When you press the camera’s shutter

button halfway, an indication of the

shooting distance and the aperture

setting are displayed.

q: Manual FlashN

Shooting distance Aperture

For guide number details with manual flash, refer to page 101.

Without pressing the <O> button of the <S> cross keys, you can

directly turn <9> to set the amount of flash output (C.Fn-13/p.84).