Owner's Manual

To perform radio transmission wireless shooting, set the master unit

and slave unit with the following procedure.

Set to <'M>.

Press the <I> button of the <S>

cross keys.

Turn <9> to select <'

M>,

then press <8>.

Set to <'x>.

Operate and set the flash you want to

set as the slave unit.

Select <'

x> in the same

way as for the master unit setting.

To avoid interference with wireless flash systems using radio

transmission used by other photographers or with other devices using

radio waves (wireless), you can change the transmission channel and

wireless radio ID. Set the same channel and ID for both the master

unit and slave unit.

Wireless Settings

Master Unit Setting

Slave Unit Setting

Transmission Channel/Wireless Radio ID Settings

To perform normal flash shooting, select <F> to clear the wireless

(master/slave) settings.

When establishing multiple radio transmission wireless flash systems,

interference between flash systems may occur even if the flashes are set to

different channels. Set different wireless radio transmission IDs for each

channel (p.51).