Owner's Manual

Wireless Settings

Setting the Transmission Channel/Wireless Radio ID

Use the following procedure to set the transmission channels and

wireless radio IDs of the master unit and slave unit. Set the same

channel and ID for both the master unit and slave unit. Note that the

procedure is the same for the master unit and slave unit.

Set a channel.

Press <8>.

Turn <9> to select the channel

symbol, then press <8>.

Turn <9> to select <X> or any

channel between Ch. <Y> and

<\>, then press <8>.

Set a wireless radio ID.

Press <8>.

Turn <9> to select the ID symbol,

then press <8>.

Turn <9> to select the position

(digit) to be set, then press <8>.

Turn <9> to select a number from 0

to 9, then press <8>.

Set a 4-digit number with the same

procedure, and select <;>.

X When transmission between the

master unit and slave unit is

established, the <D> lamp is lit in

green.

Transmission channel

Wireless radio ID