Owner's Manual

Wireless Settings

During radio transmission wireless shooting, the master unit’s LCD

panel illuminates or turns off according to the charge status of the

master unit and slave units (firing groups). The master unit’s LCD panel

illuminates if the master unit and slave units are not fully charged. When

the master unit and slave units are fully charged, the LCD panel

illumination will turn off after approx. 12 sec. As the charge for the

master unit and slave units becomes insufficient when you take a

picture, the master unit’s LCD panel will be illuminated again.

You can save the wireless settings to the master unit and slave unit,

and recall the settings later. Operate the master unit or slave unit

separately depending on which unit’s settings are to be saved or

recalled.

Select <L>.

Press the <1> button.

Turn <9> to select <L>, then

press <8>.

Save or load the settings.

Turn <9> to select <V> (save)

or <J> (load), then press <8>.

Select <;>.

X The settings are saved (stored in the

memory) or the settings that were

saved are set.

LCD Panel Illumination

Memory Function

If any of the master unit or slave unit (firing group) is not fully charged,

<G> will be displayed on the master unit’s LCD panel. Make sure to

take the picture after checking either the <G> icon is not displayed on

the LCD panel or the LCD panel is not illuminated.