Owner's Manual

64
[: Shooting in a Different Flash Mode for Each Group
3
Set each firing group.
Set the flash mode, flash output, or flash
exposure compensation amount of each
firing group by operating the master unit.
Press <8>.
Turn <9> to select the firing group
to be set, then press <8>.
Setting the flash mode
Turn <9> to select the flash mode
displayed on the right of <m> to
<n>, then press <8>.
Turn <9> to select the flash mode,
then press <8>.
Setting the flash output and flash
exposure compensation amount
Turn <9> to select the flash output
or flash exposure compensation
amount symbol, then press <8>.
When using the < q > mode, set the flash
output. When using the <
a > or
<
/ > mode (auto external flash
metering), set the flash exposure
compensation amount as required.
Repeat step 3 to set the flash function
of all firing groups.
Once the settings are complete, press the
<
0 > button to return to the screen of step 3.
You can set the flash exposure
compensation for the entire firing group by
selecting the flash exposure compensation
<
f > symbol, using the screen of step 3.
4
Take the picture.
X Each slave unit fires at the same time
in each flash mode set.
Firing groups
Flash exposure compensation
for all firing groups
Flash mode
Flash output / flash exposure
compensation amount