Owner's Manual

Wireless Settings

Turn <9> to select any channel

between Ch. “Y” and “[”,

then press <8>.

You can save the wireless settings to the slave unit, and recall the

settings later. Operate each slave unit individually as you desire to save

or recall its settings.

Select <L>.

Press the <1> button.

Turn <9> to select <L>, then

press <8>.

Save or load the settings.

Turn <9> to select <V> (save)

or <

J> (load), then press <8>.

Select <

;>.

X The settings are saved (stored in the

memory) or the settings that were

saved are set.

Transmission channel

Memory Function

If the transmission channels of the master unit and slave unit are different,

the slave unit will not fire. Set to the same number.