Owner's Manual

94
These instructions are continued from Chapter 7.
To connect in camera access point mode, see “Using Camera Access
Point Mode to Establish a Connection” (p.54).
1
Select the printer to connect to.
 When a list of detected printers is
displayed, select the printer to
connect to and press <0>.
 Some printers may make a beeping
sound.
 When 16 or more printers are
detected or search takes over 3
minutes, you can select [Search
again].
 When a connection is established,
the settings are saved and an image
on the card is displayed.
 The camera’s <k> lamp will light up
in blue.
2
Select the images to be printed.
 Select and print images on the
camera (p.95).
The settings for communicating with a printer are now complete.
Using Infrastructure Mode to Establish a Connection