Owner's Manual

111
3 Correction of Lens Peripheral Illumination and Aberrations
2
Take the picture.
 The image will be recorded with the
chromatic aberration corrected.
1
Select the setting.
 Check that [Correction data
available] is displayed for the
attached lens.
 Select [Distortion], then press <0>.
 Select [Enable], then press <0>.
2
Take the picture.
 The image will be recorded with the
distortion corrected.
The camera already contains data for lens peripheral illumination
correction, chromatic aberration correction, and distortion correction for
approx. 30 lenses. If you select [Enable], the peripheral illumination
correction, chromatic aberration correction, and distortion correction will
be applied automatically for any lens whose correction data is
registered in the camera.
With EOS Utility (EOS software), you can check which lenses have their
correction data registered in the camera. You can also register the
correction data for unregistered lenses. For details, refer to the EOS
Utility Instruction Manual (p.158).
For lenses incorporating the correction data, it is not necessary to
register the correction data to the camera.
Distortion Correction
Lens Correction Data