Owner's Manual

141
Responding to Error Messages
 In the case of [q], is Camera Connect running?
 Establish a connection using Camera Connect (p.33, 84).
 In the case of [l], is the power of the printer on?
 Turn on the printer.
 Are the camera and the access point set to use the same
encryption key for authentication?
 This error occurs if the encryption keys do not match when the
authentication method for encryption is set to [Open system].
The setting is case-sensitive, so check upper- and lower-case
characters. Make sure that the correct encryption key for
authentication is entered on the camera (p.80, 119).
 Is the power of the target device and access point on?
 Turn on the target device and access point, then wait a while. If a
connection still cannot be established, perform the procedures to
establish the connection again.
11: Connection target not found
12: Connection target not found