User Manual

Transporting Your Printer
Do not tilt the printer or turn it on its side or upside down. Doing so may cause ink to leak during relocation.
If you can transport the printer in its horizontal orientation:
Packing the printer
If the printer may tilt during transport:
Important
• If you tilt the printer or turn it on its side or upside down, ink may leak.
For this reason, when transporting the printer, to prevent the ink leakage, the ink in the printer and a
certain amount of ink in the ink tanks need to be ejected into the maintenance cartridge.
If the maintenance cartridge does not have the remaining capacity enough for ejected ink, you need
to replace it with a new one. Up to three maintenance cartridges are required.
If replacement of the maintenance cartridge is not possible, printer transport preparation cannot be
executed. We recommend you to prepare maintenance cartridges before executing printer transport
preparation.
However, the maintenance cartridge removed for printer transport preparation may still have the
remaining capacity for printing.
In such cases, the removed maintenance cartridge can be reinstalled for use.
When you first use the printer after executing printer transport preparation, a certain amount of ink is
consumed to set up the printer for printing. The maintenance cartridge is also consumed for this set
up.
Prepare to transport the printer and remove ink tanks.
1. Preparing to Transport Your printer
2. Packing Your printer
3. Reinstalling Your printer
Preparing to Transport Your printer
1. Make sure that the power is turned on.
2. Select Maintenance on the HOME screen, then press the OK button.
LCD and Operation Panel
The Maintenance screen will appear.
3.
Select Prepare to transportation, then press the OK button.
256