User Manual

Note

• To connect machine to Windows XP computer using cableless setup, follow these steps:

Follow the procedure below to set up the machine and computer.

1. Set machine to Access Point Mode.

2. Right-click Wireless Network Connections icon on notification area of desktop, and then click

View Available Wireless Networks.

3. Select network name on screen that appears, and then click Connect.

Select "XXXXXX-GXXXXseries" ("XX" represents alphanumeric characters) as network name.

4. Enter network key on screen that appears, and then click Connect.

By default, the serial number of the machine is used as the network key. Check the serial

number on the back of the machine.

5. Use Setup CD-ROM or follow instructions on Canon website.

Cannot Communicate with Machine Using Access Point Mode

Check1

Make sure machine is turned on.

Check2

Is the access point mode disabled?

Enable the access point mode following the procedure below.

Press and hold Wi-Fi button and release it when ON lamp flashes.

Press Black button, Color button, and then Wi-Fi button in this order.

The ON lamp changed from flashing to lit and the access point mode is enabled.

Check3

Make sure machine is selected as connection for wireless communication

device (e.g. computer, smartphone, or tablet).

Select the access point name (SSID) specified for the machine as the connection destination for

communication devices.

Check4

Have you entered the proper password specified for the access point mode?

If the security setting of the access point mode is enabled, you need to enter the password to connect your

communication device to the machine.

Check5

Make sure machine is not placed too far away from the wireless

communication device.

Place the wireless communication device and machine where there are no obstacles between them. Wireless

communication between different rooms or floors is generally poor. Wireless communication can be impeded

687