User Manual

— 22—
4.
Press the cursor ▲▼ button to select
Security Lock.
5.
Press the cursor ◄► button to enable
or disable security lock function.
A password dialog box automatically
appears.
6.
You can use the cursor buttons
▲▼◄►
on IR remote control for password
entry. You can use any combination
including the same arrow five times,
but not less than five.
Press the cursor buttons in any order
to set the password. Push the MENU
button to exit the dialog box.
7.
The password confirm menu appears
when user presses the power-on key
in case the Security Lock is enabled.
Enter the password in the order you
set it at step 5. In case you forget the
password, please contact the service
center.
Service center will validate the owner
and help reset the password.