Manual

35
Standard Scanning
Click the Select document and Output panels, and then click the
[Scan] button to scan the document. You can select the scan method
according to the document type and purpose of use before scanning.
“Standard Scanning” (See p. 36)
Scanning Shortcut
You can register in advance combinations of frequently-used
document selections and output methods as a
"Scanning Shortcut". Just click the Scanning shortcut panel to
implement the scan.
“Scanning Shortcut” (See p. 38)
Start button
If a job is assigned, the scanning starts when you set the document
and press the Start button.
“Scanning with Start Button” (See p. 42)
Starting and Exiting CaptureOnTouch
By default, CaptureOnTouch becomes resident in the system when
you start your computer.
Double-click in the taskbar to start CaptureOnTouch and display
the main window.
Hint
• You can also start CaptureOnTouch from the Start menu. Click
[Start] - [All Programs] - [Canon DR-C240] - [DR-C240
CaptureOnTouch].
• The interval between the time you press the Start button on the
scanner and the time scanning begins is shortened when the [Make
CaptureOnTouch resident] check box is selected in the [Basic
settings] tab of the [Environmental settings] dialog box. For details,
see “Environmental Settings” on p. 49.
Exiting CaptureOnTouch
To close the CaptureOnTouch window, click at the top of the
window. This closes the window, but CaptureOnTouch will continue to
reside in the system.
To quit the CaptureOnTouch application, click in the taskbar, and
select [Exit] from the menu.
CaptureOnTouch becomes no longer resident in the system and the
icon disappears from the taskbar.
Restarting CaptureOnTouch
To use CaptureOnTouch after it has been made not resident in the
system, use one of the following procedures to restart it.
CaptureOnTouch will start and become resident in the system again.
• Click [Start] - [All Programs] - [Canon DR-C240] - [DR-C240
CaptureOnTouch].
• Press the Start button on the scanner (in this case, the main screen
of CaptureOnTouch will open and scanning will start using the scan
method assigned to the Start button).
Hint
In Windows 8.1 / 8, it is registered in the following location.