Owner's Manual
Table Of Contents
- Getting Started
- Table of Contents
- Using This Manual
- Memory Card Compatibility
- About Electronic Manual and Software
- Supplied Accessories
- Parts & Controls
- Basic Guide
- Advanced Guide
- Camera Basics
- Auto Mode / Hybrid Auto Mode
- Shooting (Smart Auto)
- Shooting in Hybrid Auto Mode
- Scene Icons
- Image Stabilization Icons
- On-Screen Frames
- Zooming in Closer on Subjects (Digital Zoom)
- Shooting at Preset Focal Lengths (Step Zoom)
- Self-Timer
- Shooting by Touching the Screen (Touch Shutter)
- Continuous Shooting
- Aspect Ratio
- Image Quality
- Movie Image Quality
- Other Shooting Modes
- Playback Mode
- Wi-Fi Functions
- Index
- Camera User Guide
- Setting the Date and Time
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Guide
- Advanced Guide
- Using the Software
- Printing Images
- System Accessory Map
- Troubleshooting
- Messages
- Functions and Menu Tables
- Specs
- Index
- Warranty
93
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Specic Shutter Speeds and Aperture
Values ([M] Mode)
Still Images
Movies
Follow these steps before shooting to set your preferred shutter speed
and aperture value to obtain the desired exposure.
For details on available shutter speeds and aperture values, see “Camera”
(
=
204).
1
Enter [ ] mode.
z Set the mode dial to [ ].
2
Congure the setting.
z Touch [ ] (1), choose the shutter speed
(2), aperture value (3), or [ ] (4),
and then turn the [ ] ring to specify a
value.
z When the ISO speed is xed, an
exposure level mark (6) based on
your specied values is shown on the
exposure level indicator for comparison
to the standard exposure level (5). The
exposure level mark is shown as [
] or
[ ] when the difference from standard
exposure exceeds 3 stops.
z The ISO speed is determined and screen
brightness changes when you press
the shutter button halfway after setting
the ISO speed to [AUTO]. If standard
exposure cannot be obtained with your
specied shutter speed and aperture
value, the ISO speed is displayed in
orange.
(
1
)
(
2
) (
3
)
(
5
)
(
6
)
(
4
)
Specic Aperture Values ([Av] Mode)
Still Images
Movies
Set your preferred aperture value before shooting as follows. The camera
automatically adjusts the shutter speed to suit your aperture value.
For details on available aperture values, see “Camera” (
=
204).
1
Enter [ ] mode.
z Set the mode dial to [ ].
2
Set the aperture value.
z Turn the [ ] ring to set the aperture
value.
● Orange display of the shutter speed when you press the shutter
button halfway indicates that the optimum exposure has not been
obtained. Adjust the aperture value until the shutter speed is
displayed in white, or use safety shift (see below).
● [ ]: Aperture value (size of the opening made by the
diaphragm in the lens)
● In [
] and [ ] modes, press the [ ] button and set
[Safety Shift] on the [
6] tab to [On] (
=
29) to have the
camera automatically adjust the shutter speed and aperture value
when there are exposure problems, so that you can shoot at the
optimum exposure.
However, safety shift is disabled when the ash res.