Owner's Manual
Table Of Contents
- Getting Started
- Table of Contents
- Using This Manual
- Memory Card Compatibility
- About Electronic Manual and Software
- Supplied Accessories
- Parts & Controls
- Basic Guide
- Advanced Guide
- Camera Basics
- Auto Mode / Hybrid Auto Mode
- Shooting (Smart Auto)
- Shooting in Hybrid Auto Mode
- Scene Icons
- Image Stabilization Icons
- On-Screen Frames
- Zooming in Closer on Subjects (Digital Zoom)
- Shooting at Preset Focal Lengths (Step Zoom)
- Self-Timer
- Shooting by Touching the Screen (Touch Shutter)
- Continuous Shooting
- Aspect Ratio
- Image Quality
- Movie Image Quality
- Other Shooting Modes
- Playback Mode
- Wi-Fi Functions
- Index
- Camera User Guide
- Setting the Date and Time
- Memory Card Compatibility
- Table of Contents
- Supplied Accessories
- Parts & Controls
- Basic Guide
- Advanced Guide
- Using the Software
- Printing Images
- System Accessory Map
- Troubleshooting
- Messages
- Functions and Menu Tables
- Specs
- Index
- Warranty
95
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Recording Movies at Specic Shutter
Speeds and Aperture Values
Still Images
Movies
Set your preferred shutter speed, aperture value, exposure, and ISO
speed.
For details on available shutter speeds and aperture values, see “Camera”
(
=
204), and for available ISO speeds, see “Changing the ISO Speed”
(
=
75).
1
Enter [ ] mode.
z Set the mode dial to [ ].
z Touch [
], and then choose [ ].
z To conrm your choice, touch [OK].
2
Congure the settings.
z Touch [ ] (1), choose an item to
congure (2), and then turn the [ ] ring to
specify a value.
3
Shoot.
z Press the movie button.
z During recording, you can switch
the setting to congure by touching
[
] repeatedly and adjust the value by
turning the [ ] ring.
● Some shutter speeds may cause ickering on the screen when
recording under uorescent or LED lighting, which may be
recorded.
(
1
)
(
2
)
Adjusting the Flash Output
Still Images
Movies
Choose from the three ash levels in [ ][ ][ ] modes.
1
Specify the ash mode.
z Press the [ ] button, choose [Flash
Settings] on the [ 5] tab, and then set
[Flash Mode] to [Manual].
2
Congure the setting.
z Raise the ash, press the [ ] button, and
choose [ ] in the menu. Turn the [ ] ring
to choose the ash output level, and then
press the [ ] button.
z Once the setting is complete, the ash
output level is displayed.
[
]: Minimum, [ ]: Medium, [ ]:
Maximum
● You can also set the ash level by accessing MENU (
=
29)
and choosing [
5] tab ► [Flash Settings] ► [Flash Output].
● You can also access the [Flash Settings] screen (
=
29) as
follows.
- Press the [
] button when the ash is up, choose [ ] in the
menu, and then press the [
] button.